China Huading CL Types Drum Gear Coupling for Metallurgy, Mining coupling and uncoupling

Item Description

Merchandise Description

CL Drum Equipment Coupling

Huading CL-variety equipment coupling is suited for connecting 2 horizontal axes transmission shafting. It has the ability of compensating relative deviation of 2 axes and belongs to movable rigid coupling. Two outer shells with internal enamel and 2 sleeves with outer teeth are composed. The sleeves and shafts are linked by keys. The 2 outer shells are connected by bolts. A sealing ring is arranged between the shell and sleeve.

♦Features
1. Tooth coupling has a small radial dimension and huge load-carrying ability. It is typically employed for shafting transmission below reduced-pace and large-load problems. Tooth coupling with high accuracy and dynamic balance can be employed for higher-speed transmission.
two. It has the potential to compensate for the deviation of radial, axial and angular equiaxed.
three. It has a compact composition, modest turning radius, massive bearing ability, higher transmission effectiveness, low noise, and a servicing cycle.

 

Comprehensive Pictures

 

Product Parameters

♦CL Equipment Coupling Main Dimension And Parameter

Model Nominal Torque
KN·m
Speed
rpm
Bore
d1,d2,dz
Length of Bore A B D D1 D2 C C1 Ctwo e Rotary Inertia
kg·m
Mass
kg
Y J1
Z2
L
mm
CL1 710 3780 18,19 42 thirty 49 106 170 110 55 16 12 0.03 7.8
20,22,24 fifty two 38 6 18.5 18.five
twenty five,28 sixty two forty four 2.5 fourteen eighteen.five
thirty,32,35,38 82 60 11
forty 112 84
CL2 1400 3000 thirty,32,35,38 eighty two sixty 75 134 185 125 70 2.five 13 22 12 0.05 12.five
forty,forty two,45 112 84 28
48,fifty
CL3 3150 2400 40,forty two,45 112 84 92 170 220 150 90 2.five 15 28 18 0.thirteen 26.9
48,50,fifty five,fifty six
sixty 142 107 36
CL5 8000 1680 50,fifty five,56 112 84 145 220 290 200 130 5 30 40 25 0.forty five 55.8
60,63,sixty five,70 142 107
71,seventy five
80,85,90 172 132
CL6 11200 1500 sixty,63,sixty five 142 107 160 246 320 230 140 5 25 25 0.70 79.9
70,71,seventy five
eighty,85,90,ninety five 172 132
one hundred,a hundred and ten 212 167
CL7 18000 1270 65,70,71,seventy five 142 107 185 286 350 260 170 5 40 40 30 1.15 109.five
80,eighty five,ninety,95 172 132 25 45
a hundred,110,one hundred twenty 212 167
CL8 22400 1140 eighty,eighty five,ninety,ninety five 172 132 210 325 380 315 190 5 35 45 30 2.38 133.eight
a hundred,a hundred and ten,one hundred twenty 212 167
130,a hundred and forty 252 202 thirty
CL9 28000 1000 ninety,95 172 132 220 335 430 365 210 5 forty 30 3.55 171
a hundred,one hundred ten,120,a hundred twenty five 212 167 30
one hundred thirty,a hundred and forty,150 252 202
a hundred and sixty 302 242
CL10 50000 850 110,120,a hundred twenty five 212 167 245 365 490 420 260 5 30 30 7.00 275.8
130,140,one hundred fifty 252 202
a hundred and sixty,170,a hundred and eighty 302 242
CL11 71000 750 120,125 212 167 280 405 545 470 330 5 40 35 13.seventy five 385
130,one hundred forty,a hundred and fifty 252 202
one hundred sixty,a hundred and seventy,180 302 242 35
one hundred ninety,two hundred,220 352 282
CL12 100000 660 140,a hundred and fifty 252 202 350 485 590 520 340 5 45 35 21.five 540
a hundred and sixty,a hundred and seventy,a hundred and eighty 302 242 38
190,two hundred,220 352 282
240,250 410 330
CL13 140000 600 a hundred and sixty,a hundred and seventy,a hundred and eighty 302 242 375 524 680 590 380 7.5 45 40 40.00 798.3
one hundred ninety,200,220 352 282
240,250,260 410 330
280 470 380
CL14 200000 540 a hundred and eighty 302 242 405 565 730 650 450 7.5 50 40 53.seventy five 976.six
a hundred ninety,two hundred,220 352 282
240,250,260 410 330
280,three hundred,320 470 380
CL15 250000 480 200,220 352 282 480 644 780 700 480 7.five 50 40 81.twenty five 1182.five
240,250,260 410 three hundred
280,three hundred,320 470 380
340,360 550 450
CL16 355000 425 240,250,260 410 330 535 720 900 785 530 10 50 150 1936
280,300,320 470 380
340,360,380 550 450
four hundred 650 540
CL17 560000 380 260 410 330 625 800 1000 885 630 10 50 285 2700
280,300,320 470 380
340,360,380 550 450
400,420,440,450 650 540
CL18 710000 330 three hundred,320 470 380 71 900 1100 990 710 10 50 400 3669
340,360,380 550 450
four hundred,420,440,450 650 540
460,480,500
CL19 1000000 300 360,380 550 450 730 910 1250 1090 800 15 60 675 5138
four hundred,420,440,450 650 540
460,480,five hundred 800 680
530,560

Note:
one. The coupling mass and rotary inertia are approximations calculated by the minimum diameter and the optimum duration of the bore.
2. Bore diameter dz <140mm.
3. J1-sort bore does not require shaft finish baffle as essential.
four. This normal applies only to previous items.

Organization Profile

HangZhou CZPT Machinery Producing Co., Ltd. is a large-tech business specializing in the style and manufacture of a variety of types of coupling. There are 86 employees in our firm, including 2 senior engineers and no less than 20 mechanical layout and manufacture, warmth therapy, welding, and other pros.

Advanced and affordable procedure, total detection signifies. Our business actively introduces overseas advanced engineering and gear, on the foundation of the situation, we make complete use of the edge and do much more study and innovation. Stringent to large top quality and run strictly in accordance with the ISO9000 quality certification method normal manner.

Our business provides various types of products. Large high quality and sensible price tag. We adhere to the basic principle of “quality 1st, provider initial, continuous improvement and innovation to fulfill the clients” for the administration and “zero defect, zero problems” as the top quality aim. 

 

Our Providers

one. Layout Companies

Our layout group has experience in couplings relating to product style and advancement. If you have any wants for your new product or wish to make further improvements, we are here to offer our help.

2. Solution Providers
uncooked supplies → Cutting → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three. Samples Process
We could develop the sample according to your requirement and amend the sample continuously to meet your require.

4. Research & Advancement
We usually analysis the new needs of the industry and develop new versions when there are new cars in the market.

5. Top quality Management
Every single action need to be a distinct take a look at by Professional Staff in accordance to the regular of ISO9001 and TS16949.

FAQ

Q 1: Are you a investing business or a maker?

A: We are a skilled maker specializing in producing
a variety of series of couplings.

Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all clients with tailored PDF or AI structure artwork.

Q 3:How extended is your shipping time?
Usually, it is twenty-30 days if the products are not in stock. It is in accordance to amount.

Q 4: Do you offer samples? Is it cost-free or additional?
Of course, we could supply the sample but not for cost-free. In fact, we have an superb price tag theory, when you make the bulk get the value of the sample will be deducted.

Q 5: How long is your guarantee?
A: Our Guarantee is twelve months beneath regular situations.

Q 6: What is the MOQ?
A: Typically our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:a hundred% self-inspection just before packing.

Q 8: Can I have a pay a visit to to your factory before the buy?
A: Certain, welcome to visit our manufacturing facility.

Q 9: What is actually your payment?
A:1) T/T. 

US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Rigid

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Nominal Torque
KN·m
Speed
rpm
Bore
d1,d2,dz
Length of Bore A B D D1 D2 C C1 C2 e Rotary Inertia
kg·m
Mass
kg
Y J1
Z2
L
mm
CL1 710 3780 18,19 42 30 49 106 170 110 55 16 12 0.03 7.8
20,22,24 52 38 6 18.5 18.5
25,28 62 44 2.5 14 18.5
30,32,35,38 82 60 11
40 112 84
CL2 1400 3000 30,32,35,38 82 60 75 134 185 125 70 2.5 13 22 12 0.05 12.5
40,42,45 112 84 28
48,50
CL3 3150 2400 40,42,45 112 84 92 170 220 150 90 2.5 15 28 18 0.13 26.9
48,50,55,56
60 142 107 36
CL5 8000 1680 50,55,56 112 84 145 220 290 200 130 5 30 40 25 0.45 55.8
60,63,65,70 142 107
71,75
80,85,90 172 132
CL6 11200 1500 60,63,65 142 107 160 246 320 230 140 5 25 25 0.70 79.9
70,71,75
80,85,90,95 172 132
100,110 212 167
CL7 18000 1270 65,70,71,75 142 107 185 286 350 260 170 5 40 40 30 1.15 109.5
80,85,90,95 172 132 25 45
100,110,120 212 167
CL8 22400 1140 80,85,90,95 172 132 210 325 380 315 190 5 35 45 30 2.38 133.8
100,110,120 212 167
130,140 252 202 30
CL9 28000 1000 90,95 172 132 220 335 430 365 210 5 40 30 3.55 171
100,110,120,125 212 167 30
130,140,150 252 202
160 302 242
CL10 50000 850 110,120,125 212 167 245 365 490 420 260 5 30 30 7.00 275.8
130,140,150 252 202
160,170,180 302 242
CL11 71000 750 120,125 212 167 280 405 545 470 330 5 40 35 13.75 385
130,140,150 252 202
160,170,180 302 242 35
190,200,220 352 282
CL12 100000 660 140,150 252 202 350 485 590 520 340 5 45 35 21.5 540
160,170,180 302 242 38
190,200,220 352 282
240,250 410 330
CL13 140000 600 160,170,180 302 242 375 524 680 590 380 7.5 45 40 40.00 798.3
190,200,220 352 282
240,250,260 410 330
280 470 380
CL14 200000 540 180 302 242 405 565 730 650 450 7.5 50 40 53.75 976.6
190,200,220 352 282
240,250,260 410 330
280,300,320 470 380
CL15 250000 480 200,220 352 282 480 644 780 700 480 7.5 50 40 81.25 1182.5
240,250,260 410 300
280,300,320 470 380
340,360 550 450
CL16 355000 425 240,250,260 410 330 535 720 900 785 530 10 50 150 1936
280,300,320 470 380
340,360,380 550 450
400 650 540
CL17 560000 380 260 410 330 625 800 1000 885 630 10 50 285 2700
280,300,320 470 380
340,360,380 550 450
400,420,440,450 650 540
CL18 710000 330 300,320 470 380 71 900 1100 990 710 10 50 400 3669
340,360,380 550 450
400,420,440,450 650 540
460,480,500
CL19 1000000 300 360,380 550 450 730 910 1250 1090 800 15 60 675 5138
400,420,440,450 650 540
460,480,500 800 680
530,560
US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Rigid

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Nominal Torque
KN·m
Speed
rpm
Bore
d1,d2,dz
Length of Bore A B D D1 D2 C C1 C2 e Rotary Inertia
kg·m
Mass
kg
Y J1
Z2
L
mm
CL1 710 3780 18,19 42 30 49 106 170 110 55 16 12 0.03 7.8
20,22,24 52 38 6 18.5 18.5
25,28 62 44 2.5 14 18.5
30,32,35,38 82 60 11
40 112 84
CL2 1400 3000 30,32,35,38 82 60 75 134 185 125 70 2.5 13 22 12 0.05 12.5
40,42,45 112 84 28
48,50
CL3 3150 2400 40,42,45 112 84 92 170 220 150 90 2.5 15 28 18 0.13 26.9
48,50,55,56
60 142 107 36
CL5 8000 1680 50,55,56 112 84 145 220 290 200 130 5 30 40 25 0.45 55.8
60,63,65,70 142 107
71,75
80,85,90 172 132
CL6 11200 1500 60,63,65 142 107 160 246 320 230 140 5 25 25 0.70 79.9
70,71,75
80,85,90,95 172 132
100,110 212 167
CL7 18000 1270 65,70,71,75 142 107 185 286 350 260 170 5 40 40 30 1.15 109.5
80,85,90,95 172 132 25 45
100,110,120 212 167
CL8 22400 1140 80,85,90,95 172 132 210 325 380 315 190 5 35 45 30 2.38 133.8
100,110,120 212 167
130,140 252 202 30
CL9 28000 1000 90,95 172 132 220 335 430 365 210 5 40 30 3.55 171
100,110,120,125 212 167 30
130,140,150 252 202
160 302 242
CL10 50000 850 110,120,125 212 167 245 365 490 420 260 5 30 30 7.00 275.8
130,140,150 252 202
160,170,180 302 242
CL11 71000 750 120,125 212 167 280 405 545 470 330 5 40 35 13.75 385
130,140,150 252 202
160,170,180 302 242 35
190,200,220 352 282
CL12 100000 660 140,150 252 202 350 485 590 520 340 5 45 35 21.5 540
160,170,180 302 242 38
190,200,220 352 282
240,250 410 330
CL13 140000 600 160,170,180 302 242 375 524 680 590 380 7.5 45 40 40.00 798.3
190,200,220 352 282
240,250,260 410 330
280 470 380
CL14 200000 540 180 302 242 405 565 730 650 450 7.5 50 40 53.75 976.6
190,200,220 352 282
240,250,260 410 330
280,300,320 470 380
CL15 250000 480 200,220 352 282 480 644 780 700 480 7.5 50 40 81.25 1182.5
240,250,260 410 300
280,300,320 470 380
340,360 550 450
CL16 355000 425 240,250,260 410 330 535 720 900 785 530 10 50 150 1936
280,300,320 470 380
340,360,380 550 450
400 650 540
CL17 560000 380 260 410 330 625 800 1000 885 630 10 50 285 2700
280,300,320 470 380
340,360,380 550 450
400,420,440,450 650 540
CL18 710000 330 300,320 470 380 71 900 1100 990 710 10 50 400 3669
340,360,380 550 450
400,420,440,450 650 540
460,480,500
CL19 1000000 300 360,380 550 450 730 910 1250 1090 800 15 60 675 5138
400,420,440,450 650 540
460,480,500 800 680
530,560

Types of Couplings

A coupling is a device that connects two shafts together. It transmits power from one end to another and is used for joining rotating equipment. A coupling is flexible and can accommodate a certain amount of end movement and misalignment. This allows for more flexibility in applications. Various types of couplings are available, and each one serves a specific purpose.
gearbox

Shaft couplings

There are many types of shaft couplings, and they are used in a wide range of applications. The type you need depends on the torque, speed, and horsepower you need, as well as the size of the shaft and its spatial limitations. You may also need to consider whether the coupling will accommodate misalignment.
Some shaft couplings are flexible, while others are rigid. Flexible couplings can accommodate up to two degrees of misalignment. They are available in different materials, including aluminum, stainless steel, and titanium. They can also be known by different names, depending on the industry. Some couplings can also be used in a single or multiple-shaft application.
The first type of shaft coupling is a rigid coupling, which consists of two parts that fit together tightly around the shafts. These couplings are designed to have more flexibility than sleeved models, and they can be used on fixed shafts as well. The flanged coupling, on the other hand, is designed for heavy loads and is made of two perpendicular flanges. The flanges are large enough to accommodate screws and are generally used with heavy-duty applications.
CZPT shaft couplings are a great choice if you’re looking for a shaft coupling that delivers high performance, durability, and low cost. These metal disc-style couplings provide low backlash and high torsional stiffness. Their high misalignment tolerance reduces reaction loads on connected components, which makes them ideal for high-speed precision applications. Available in single and double-disc models, they have torque ratings of up to 2,200 in-lbs. (250N) and are available in fourteen sizes.
When using shaft couplings, it is important to choose the right type for your application. Backlash can cause a shaft coupling to break or become unusable. In order to prevent this from happening, you should replace worn or loose parts, and ensure that the hub and key are evenly positioned with the shaft. If you’re using a shaft coupling in a motion-control system, it is important to keep the torque level consistent.

Flexible couplings

Flexible couplings are a type of coupling used to connect two shafts. They are made of rubber or plastic and allow for axial movement of the connected equipment. They do not require lubrication and are resistant to fatigue failure. Flexible couplings are useful for a number of applications. A common type of flexible coupling is the gear coupling, which has gear teeth inside its sleeve. Another type of flexible coupling is the metallic membrane coupling. A metallic membrane coupling is flexible due to flexing metallic discs.
One major disadvantage of flexible couplings is their inability to fit certain types of pipe. This is because most couplings need to be stretched to fit the pipe. This problem is often the result of a change in pipe technology. Traditionally, drain and soil pipe is made of ductile iron or cast iron. Today, most pipes are made of PVC, which has a larger outside diameter than either cast or ductile iron. Because of these changes in pipe technology, many coupling manufacturers have not updated their mold sizing.
Flexible couplings can be either metallic, elastomeric, or a combination of the three. While there are some common characteristics of each type, you should always consider the tradeoffs of each type before choosing one. Generally, the most important considerations when selecting a flexible coupling are torque, misalignment, and ease of assembly and maintenance.
Flexible couplings are used in a wide range of industries. They are useful for connecting two pipes to ensure torque transfer. Although the types available are different, these are the most adaptable couplings in the market. They can withstand movement, vibration, and bending without causing any damage to the piping.
gearbox

Clutch couplings

A clutch coupling connects two rotating shafts by friction. The clutch engages power when the engine is running, disengaging power when the brake is applied. Clutch couplings are used in applications where the speed of a machine is variable or where continuous service is required. The clutch can transmit power, torque, and axial force.
Clutch couplings come in a variety of styles and configurations. Some couplings are flexible, while others are rigid. Flexible couplings are available in a variety of materials, including stainless steel and aluminum. Some couplings also have a non-backlash design, which helps compensate for misalignment.
Clutch couplings may be synchronous or asynchronous. Synchronous couplings engage and disengage automatically when the driven machine exceeds its output speed. These couplings are synchronized by a synchronizing mechanism. When the output speed is exceeded, the synchronizing mechanism initiates the engagement process. The synchronizing mechanism does not engage or disengage when the output speed drops.
High speed clutches are available from a variety of manufacturers. Some manufacturers offer OEM assembly, repair services, and third-party logistics. These manufacturers serve the automotive, chemical, food, and wood industries, as well as the oilfield and material handling industries. Custom clutches can be manufactured for specific applications and can be fitted with additional features, such as precision machined teeth or keyway slots and grooves.
Couplings are available in PCE, C/T, and metric bores. Typically, the size of the input and output shafts will determine which type of coupling is needed. In addition, clutches may be configured for intermediate or high speeds, depending on the required torque.

Clamped couplings

Clamped couplings are commonly used in a variety of industries. They can be used in medical equipment, dental equipment, military equipment, laboratory equipment, and in precision industrial controls. They are available in a wide variety of sizes and keyways. This type of coupling offers a number of advantages, including ease of installation and quick and easy replacement.
A clamp coupling connects two parts by compressing them together. The clamping elements can be formed in a variety of ways, but they all have a gap between their surfaces. This friction squeezes the two parts together, much like pulling two rubber gloves apart. This type of coupling is also useful for joining two hoses or piping units.
Clamped couplings are designed with a single or double clamping shaft. The clamping parts are mounted in two halves and are held together by eight socket head cap screws. They offer high torque capacity and require little installation space. Their high rigidity ensures good positioning accuracy, making them ideal for dynamic drives. In addition, they are wear-free and offer simple radial assembly.
The invention relates to a method and system for clamping pipes to a tank vessel. This invention also relates to a method of loading and unloading tank vessels. The method can be used in oil production platforms and other platforms. A single point mooring method is also used in oil production platforms.
Clamped couplings can also be flexible. They can join two shafts together while allowing a small amount of end movement and misalignment. These couplings may also be used in the assembly of motors and gearboxes.
gearbox

CZPT’s coupling

CZPT couplings are designed to be flexible, allowing them to accommodate misaligned shafts and transmit torque in either direction. They are made with three discs, two hubs, and a center that are arranged with grooves and fins. These features allow for two degrees of freedom during assembly, and can accommodate misalignment of up to 5% of the shaft diameter.
CZPT couplings have many uses. For example, they can be used to join two parallel coaxial rotating shafts. Their ability to transmit torque at the same rotation mechanism and speed makes them ideal for applications where electrical currents may be a problem. Because the couplings are not made of metal, they are electrically isolated. Designers should test their couplings during the prototype stage to ensure they are working properly.
The CZPT coupling consists of two hubs with one slot on each. An intermediate disk is located between the two hubs. The discs are used to reduce or prevent wear on other machine parts. CZPT couplings are inexpensive and easy to replace. They also have electrical insulation, which makes them easy to repair or replace.
CZPT couplings are a popular choice for stepper motor-driven positioning stages. The plastic center disc offers electrical isolation and absorbs shocks from frequent start/stops. These couplings are available in through-hub and blind-bore styles and can be installed in many applications.
CZPT couplings also allow for small degrees of shaft misalignment. This allows them to function in systems where shaft access is limited. They are easily removed without tools.
China Huading CL Types Drum Gear Coupling for Metallurgy, Mining     coupling and uncouplingChina Huading CL Types Drum Gear Coupling for Metallurgy, Mining     coupling and uncoupling
editor by czh 2023-01-12